Pond Volume Calculator

Work out how many litres your aquarium or pond holds, plus the equipment you'll need – heater, filter, substrate and salt for tanks; liner, pump, filter and UV for ponds.

Your tank

Shape
Measure in

Results

0litres
0 UK gallons 0 US gallons
Actual water once set up
–About 80–90% of the glass volume, after substrate, rocks and the gap at the top.
Weight of water
–Plus glass, cabinet, substrate and rockwork – make sure your floor and stand can take it.
Heater
–
Filter flow
–
Substrate
–Approximate, based on sand or gravel at about 1.5 kg per litre.
Marine salt to fill
–At around 35 g per litre (salinity about 1.025), mixed with RO water.
Surface area
–
Average depth
–
Liner size
Minimum – Length and width plus twice the deepest point, plus 30 cm overlap on each edge.
Pump flow
–
Filter
–
UV clarifier
–
Koi stocking guide
–A rough guide of about 1,000 litres per adult koi – good filtration matters more than the number.
Weekly water change
–10–20% a week suits most tanks.

All figures are estimates. Not sure what you need? Call us on 01322 664397 or pop into Birchwood Aquatic Centre in Swanley and we'll help you choose the right equipment.

Disclaimer: Our pond volume calculator is intended as a guide only, and the calculation is an estimate. The exact volume of your pond depends on factors such as irregularities in its shape, which can't be factored in. However, it gives a useful estimate based on standard sizing and surface area. Equipment suggestions are general guidance.

If you use this calculator to dose water treatments or medications, you do so at your own risk. Always follow the manufacturer's instructions and take the factors above into account.